Fuji Electric ZSS-8 Series, Инструкция по эксплуатации

Страница: 52 / 119

- 42 -
INZ-TN8ZSS-E
6. CALIBRATION AND SETTING
6.1 Zero calibration
Select “Zero Calibration” from the “Menu” screen and press the key.
6.1.1 Preparation
 Do not detach the transmitter unit during calibration while the pow-
er is supplied. If you turn the transmitter unit towards a person, the
laser beam can damage his/her cornea.

The laser beam is the invisible infrared light. Do not watch the laser
beam directly or scattering light.

Do not watch the laser beam directly with the optical measuring
device. Otherwise, it may cause serious damage to your eyes.
Parts name Quantity Remarks
Calibration gas cell 1 To be ordered separately
Cable between receiver unit and
transmitter unit 1 To be ordered separately
Cable between receiver unit and
control unit (for calibration) 1 To be ordered separately
Zero gas (N
2
) 1 To be ordered separately
Pressure regulator 1 To be ordered separately
Pipe (PTFE tube, etc) Several m 10/8 mm or larger
Joint (Rc1/4) 2 For connecting the zero gas line and the
exhaust line to the calibration gas cell
Flow meter 1 2L/min or more
Thermometer 1 4 to 20mA output, for temperature correc-
tion (required for range HCl and NH
3
)
Pressure gauge 1 4 to 20mA output, for pressure correction
(required for low range HCl and NH
3
)
Others (joint, etc)
(1) Turn OFF the power.
(2) Remove the receiver box and the transmitter box using the hexagon wrench. Never remove the boxes
while the system into which the analyzer is incorporated is in operation. Otherwise, hot temperature gas
may blow out.
ENT
CAUTION