Fuji Electric ZKMA, Инструкция по эксплуатации

Страница: 2 / 118

- i - INZ-TN2ZKMA-E
PREFACE
We are grateful for your purchase of Fuji Direct Insertion Type Zirconia Oxygen Analyzer Converter (ZKM).

First read this instruction manual carefully until an adequate understanding is acquired, and
then proceed to installation, operation and maintenance of the converter. Improper handling
may result in accidents or injury.

The specifications of this converter will be changed without prior notice for further product
improvement.

Modification of this converter is strictly prohibited unless a written approval is obtained
from the manufacturer. Fuji will not bear any responsibility for a trouble caused by such a
modification.

This instruction manual shall be stored by the person who actually uses the converter.

After reading through the manual, be sure to keep it near at hand for future reference.

This product falls within category 9 (Monitoring and control instruments including indus-
trial monitoring and control instruments) of Annex 1 of EU RoHS directive (2011/65/EU).
Please do not use it for consumer use.

This instruction manual should be delivered to the end user without fail.
Manufacturer: Fuji Electric Co., Ltd.
Type: Described in the nameplate put on the main body
Date of manufacture: Described in the nameplate put on the main body
Product nationality: Japan

Related instruction manual
Direct insertion type zirconia oxygen analyzer detector (Type: ZFK8) ·········· INZ-TN5ZFK8-E
Notice
Fuji Electric Co., Ltd. 2015
Issued in October 2015

It is prohibited to transfer part or all of this manual without Fuji
Electric’s permission in written format.

Description in this manual is subject to change without prior no-
tice.
Rev. 1st edition February, 2017
Rev. 2nd edition May, 2018