Fuji Electric ZKMA, Инструкция по эксплуатации

Страница: 104 / 118

- 93 - INZ-TN2ZKMA-E
10.5.14 Hold value setting (error hold)
Description

Using this function, you can set (select) the output value of analog output signal when the analog out-
put hold function (error hold) is enabled.

If the maintenance mode is set to “Valid,” analog output signal is held at the value set in this proce-
dure.
 Settable range: Select one of the following.
(1) [0%] : Held at 0% (4 mA/0 V).
(2) [100%] : Held at 100% (20 mA/1 V).
(3) [Last value] : Held at the value immediately before the value for analog hold.
(4) [Setting value] : Held at the value set as the “10.5.15 Setting of hold setting val-
ue (error hold)”.
Procedu
re
Operation
(example)
Setting the output value of analog output hold to “0%”
Key operation Description
Displayed message
(LCD)
(1) Display the screen on the right in accordance with the key op-
eration summary and press the
key.
PARAMETER MENU
AO HOLD (ERROR)
(2)
Press the key to display the screen on the right and press
the key.
The analog output hold value setting screen appears.
AO HOLD (ERROR)
OUTPUT SELECT
(3)
Use the key to select the hold value.
Press the key to set the value.
OUTPUT SELECT
0%
(4)
Press the key.
OUTPUT SELECT
0%
(5)
Press the key to return to the screen on the right.
AO HOLD (ERROR)
OUTPUT SELECT