Fuji Electric Europe GmbH
Page 11 of 26
5
SETTING
In this chapter, how to change parameters by means of multifunctional keypad is explained. In this case, as
example, setting on F03 is changed from 50 Hz to 60 Hz.
Fref
0.00
Hz
STOP
Iout
0.00A
PWR
0.03kW
1.
Press
key always from the main screen to
acces Program menu.
↓
PRG
0.Quick Setup
1.Start
-
up
2.Function Code
3.INV Info
4.Alarm Info
5.User Config
2.
Use
/
to select [2. Function code] as it is
shown on the figure, press
to confirm.
↓
/
PRG>2
1.Data Set
2.Data Check
3.Changed Data
4.Data Copy
5.Timer Setup
6.Initialize
3.
Use
/
to select [1. Data Set] as it is shown
on the figure, press
to confirm.
↓
/
PRG>2>1
F:Fundamental
E:Extension
C:Control
P:Motor Param
H:High Perform
H1: High Perform
4.
Use
/
to select the family of functions which
includes the parameter has to be modified
(in this case F:Fundamental).
↓
/
PRG>2>1
F:Fundamental
00
:Data protection
01
:Freq comm?d 1
02
:Opr method
03:Maximum freq
04
:Base freq
5.
Use
/
to select parameter which has to be
modified (in this case F03), and press
to
confirm.
↓
/
Pressing
, screen returns to the previous status
Pressing
, main screen is shown.
