4
TN4FCXA2
j
-EDF-
E
INTRODUCTION
These transmitters have been designed to meet the standards and regulations in force. This manual
must be read carefully before the transmitters are used to familiarise yourself with the installation,
the connection processes, the wiring and all the operations for start-up and maintenance. The
technical information is detailed in each “Technical Specification” for each transmitter version.
Carefully read the ATEX “HD FCX AII 002” instructions for any use of the transmitters in hazardous
areas.
The identification plate below is riveted onto the electronic unit.
Verify before use that the equipment provided matches your needs.
1
Tag number
2
Type of transmtter
3
Model no. (see the codification in the corresponding “Technical Specification”)
4
Maximum range of adjustment possibilities
5
Power supply
6
Output signal
7
Min/max scale
8
Maximum service pressure
9
Serial No.
10
Date of manufacture
11
Description of transmitter mounted in hazardous area - see corresponding package leaflet for the transmitters mounted
in hazardous area.
12
Marking 2014/68/EU G1 TAMB. MIN. -40°C/ MAX. +85°C WITHOUT OPTIONS
For category III or IV devices, G1 = usable on all types of fluid
