FuelTech PEAKANDHOLD PRO, Руководство пользователя

Страница: 37 / 60

17
EN
Peak and Hold PRO Injector Driver
9. FTCAN 2.0 protocol
Peak and Hold PRO Injector Driver has an advanced diagnosis system for
malfunctions, faults and problems. This helps a lot to diagnose and monitor the
functions of your ignition system. When used in conjunction with a FuelTech
PowerFT series ECU (FT450 or higher), this programming is already built in your
ECU and no additional programming is required to receive and interpret all the
information. When using Peak and Hold PRO Injector Driver together with other
aftermarket ECU’s or data acquisition systems that have a CAN communication
port and can be programmed, it’s still possible to have access to all of that data
in order to use the benefits of the Peak and Hold PRO Injector Driver to its fullest.
NOTE
The CAN 2.0 protocol is available on our website under the
manuals section
MeasureID DataID Description Unit Multi Broadcast (rate)
0x148 0x00A4 Supply voltage Driver 1
V
0,01
P&H Pro Injector Driver 10Hz
0x14A 0x00A5 Supply voltage Driver 2
0x14C 0x00A6 Internal temp 1 Driver 1
ºC
0x14E 0x00A7 Internal temp 2 Driver 1
0x150 0x00A8 Internal temp 1 Driver 2
0x152 0x00A9 Internal temp 2 Driver 2
0x1B4 0x00DA Time to Peak (Cyl 1 / A)
ms 1
0x1B6 0x00DB Time to Peak (Cyl 2 / A)
0x1B8 0x00DC Time to Peak (Cyl 3 / A)
0x1BA 0x00DD Time to Peak (Cyl 4 / A)
0x1BC 0x00DE Time to Peak (Cyl 5 / A)
0x1BE 0x00DF Time to Peak (Cyl 6 / A)