12
FT Input Expander
EN
8. Troubleshooting
- ECU is not reading data from FT Input Expander
•
Make sure the FT Input Expander has the correct map (See item 7 of
this manual).
•
Make sure to send the map to the FT Input Expander (See item 7 of this
manual).
•
Make sure that the map of the ECU has the inputs enabled via the CAN
Network (See item 7 of this manual).
- FT Input Expander is not communicating with FTManager
•
Check the electrical connection of the module.
•
Check the connection of the CAN network connectors.
