9
FT Input Expander
EN
Configuring General Inputs
d - In the General Inputs group, click on the channel to be configured.
e - The channel configuration screen in FT Input Expander is very similar to
the screen on the FT Manager under “
Sensors and Calibration / Inputs
”,
with a single difference which is the “
Sampling rate
” field. This parameter
is responsible for the frequency that the information is sent via the CAN
network.
It is divided into 4 options: 2, 10, 50 and 100 Hz.
f - Click on the “
OK
” button to save the configuration.
NOTE
The FT Input Expander records at sample rates of up to 100Hz.
If you need to monitor information with rates up to 200Hz, use
a channel from your Power FT ECU itself.
