●
The UART port connector & Cable specification:
1. Any type of USB (micro USB, mini USB, standard USB) or serial
connector is defined by the customer.
2. Cable : OD 3.5 +/- 0.1 mm , # 28 x 4 Color wires
3. Contact resistance >2 ohm
4. Insulation resistance: DC 300V 20 Mohm /10 ms
The Blue Tooth function model is FT-B13W-BT.
Operation Method:
★
Install the APK accordance with the communication protocol into the blue tooth
signal receiving device such as mobile phone.
★
Activate the blue tooth signal receiving device such as mobile phone to match
with the blue tooth of NIBP.
★
Start to measure according to the normal blood pressure monitor operation
method.
★
After measuring the result will be displayed on LCD including systolic pressure,
diastolic pressure and pulse will be automatically sent to the blue tooth receiving
device such as mobile phone.
The additional function of this model blood pressure monitor is that transmit the test
result to the APK in the receiving device via blue tooth technology.
●
Example for the Blue Tooth Operation connection:
Bluetooth 4.1 work with IOS System
Firstly search in the "APP Store" for "Light Blue" application software
（
as this
image
）
and install properly
。
.Open the installed "Light Blue" application software (see Figure 1) and activate
Ⅰ
Bluetooth 4.1 blood pressure monitor.
Figure 1
