Shut Down
After measurement, press button “ON/OFF” to turn off the device. The device will be
automatically power off after 1 minute of none use.
Voice Function
The device with voice function can speak out in the following state:
The device will speak out the prompt that “keep silence to take a cuff at the same
height with your heart ” when the measure begin.
The device will speak out the displayed blood pressure (systolic and diastolic
blood pressure), heart rate after each measurement finish.
The device will speak out the last time displayed memory blood pressure (systolic
and diastolic blood pressure), and heart rate when reading memory result.
Note:
The voice function is ONLY for models FT-B11W-V, FT-B12W-V, FT-B13W-V, FT-B14W-V,
FT-B21Y-V and FT-B22Y-V.
UART connection and Blue Tooth Function
The UART connection model is FT-B13W-UR
(UART= Universal Asynchronous Receiver Transmitter)
Operation Method:
★
Install the APK by the receiving device manufacture accordance with the
communication protocol into the signal receiving device such as mobile phone.
★
Use cable to connect receiving device with the blood pressure monitor which with
UART port.
★
Activate the receiving device and let it be in stand- by status for blood pressure
measuring.
★
Activate the blood pressure monitor which with UART port and start testing
according to the normal blood pressure monitor operation method.
★
After testing the result including systolic pressure, diastolic pressure and pulse will
display on LCD, press the SEND button to send these data to the receiving device
such as mobile phone.
