FSP HySpirit series User Manual
14
http://www.fsp-group.com.tw/en/product/PVInverter.html
10.
Communication
The inverter is equipped with RS232 port, USB port and a slot for alternative communication
interfaces in order to communicate with a PC via corresponding software. This intelligent
slot is suitable to install with SNMP card and Modbus card. Follow the procedure below to
connect communication wiring and install the software.
For RS232 port, you should use a DB9 cable as below:
For USB port, you should use a USB cable as below:
For SNMP or MODBUS card, you should use RJ45 cables as below:
Please install monitoring software in your computer. Detailed information is listed in next
chapter. After software is installed, you may initialize the monitoring software and extract
data through communication port.
