manualshive.com logo in svg

FSN FS-L190 D, Руководство пользователя

Поделиться
Скачать
FSN FS-L190 D Скачать руководство пользователя страница 9

English - 8

This symbol alerts the user that important literature concerning the

operation of this unit has been included. Therefore, it should be read

carefully in order to avoid potential problems. 

This symbol warns user that un-insulated voltage within the unit may

have sufficient magnitude to cause electrical shock. Therefore, it is 

dangerous to make contact with any part inside the unit. To reduce 

the risk of electric shock, DO NOT remove cover (or back). 

There are no user serviceable parts inside. Refer servicing to 

qualified service personnel. 

To prevent fire or shock hazards, do not expose this unit to rain or 

moisture. Also, do not use this unit's polarized plug with an extension

cord receptacle or other outlets unless the prongs can be fully inserted.

The display is designed to meet the medical safety requirements for a

patient vicinity device. 

This device may not be used in connection with life support 

equipment. 

CAUTION

Underwriters Laboratories (UL) Classification: 

UL safety Compliance: 

This medical LCD monitor is U.L. Classified WITH RESPECT TO 

ELECTRIC SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN 

ACCORDANCE WITH UL 60601-1/CAN/CSA C22.2 NO. 601.1 

Содержание FS-L190 D






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды