63 - English
Cleaning Instructions
Precautions
•
Before cleaning, switch the display in stand-by position to prevent
the control touch panel from being activated inadvertently by
sweeping over the front filter. In stand-by position the touch panel
cannot be activated by just sweeping over them. To switch the
display on again, you must press the stand-by key again.
•
Take care not to damage or scratch the front filter or LCD panel.
•
Be careful with rings or other jewellery that can touch the front filter.
•
Do not apply pressure on the front filter or LCD panel.
•
Do not apply or spray liquid directly to the front filter, panel or
cabinet as excess liquid may cause damage to internal electronics.
Instead, apply the liquid to the cleaning cloth.
•
Follow your hospital protocol for the handling of blood and body
fluids.
•
The display is not disinfected or packed in sterile environment.
•
Follow your hospital protocol in case the display needs to be
disinfected prior to installation.
Front Filter
Proceed as follows:
1. Remove dust with a dry, lint-free, non-abrasive soft cotton cloth.
2. Remove fingerprints or grease using a lint-free, non-abrasive soft
cotton cloth that is lightly moistened with plain water or a mild
commercial glass cleaning product suited for coated glass surfaces.
3. Gently wipe dry with a dry cloth.
The following products are tested and approved:
•
Misty Clear Lemon 10 Disinfectant
•
Bohle glass cleaner
•
Zep Heavy-duty glass & all surface cleaner
