FSN FS-L190 D Скачать руководство пользователя страница 12

Страница: 12 / 69

11 - English

FCC Information

This medical LCD monitor unit has been tested and found to comply with the

limits of a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against interference.

This monitor can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, it may interfere with other radio communications

equipment. There is no guarantee that interference will not occur in a particular

installation.

If this equipment is found to cause harmful interference to radio or television

reception, the user is encouraged to try to correct the interference by carrying out

one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the distance between the medical LCD monitor and the subject of

interference.

3. Plug the monitor into an outlet on a different electrical circuit than that to which

the subject of interference is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

NOTICES TO USER

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause

undesired operation.

FCC WARNING

This medical LCD monitor generates or uses radio frequency energy. Changes

or modifications to this medical LCD monitor may cause harmful interference

unless the modifications are expressly approved in the instruction manual. The

user could lose authority to operate this equipment if an unauthorized change or

modification is made.

Содержание FS-L190 D






































































Результаты поиска

Содержание FS-L190 D

Отзывы:

Бренды по названию

Популярные бренды

FSN FS-L190 D, Руководство пользователя

Результаты поиска

Содержание FS-L190 D

Отзывы:

Бренды по названию

Популярные бренды