Frymaster Universal Holding Cabinet, Руководство по обслуживанию, Страница: 13 / 55

7-1
7 Switching Between Breakfast, Lunch, Clean Mode and Slot On/Off
Pressing the MENU key scrolls the following information for each slot.
1. The inactive meal product selection (breakfast or lunch).
2. Clean Mode.
3. Slot On/Off status.
Pressing the MENU key again returns the display to Operator Mode.
7.1 Selecting Breakfast and Lunch
To establish the breakfast and/or lunch menu, determine the type and number of product tray(s) to
use. The following is the established configuration of trays and products:
1/3-size plastic tray – holds meat and egg products that are grilled (hamburger patties,
bacon, eggs, sausage, etc.). Each slot can hold up to three trays of this type.
1/2 size plastic tray with wire insert – holds breaded fried products (McNuggets,
McChicken, Filet-O-Fish, etc.). Each slot can hold up to two trays of this type.
Full-size plastic tray – holds baked products (biscuits, muffins, etc.). Each slot can hold one
tray of this type.
To change the product selection of a slot from Breakfast to Lunch, press the MENU key to display
the lunch product selections. Press the ENTER key to activate the meal selection. If the ENTER
key is not pressed within 5 seconds, the product selection will return to the Breakfast meal selection.
Changing Meal Selection
ENTER
PAGE
MENU
SAUS
SAUS SAUS
Press MENU key to display
inactive meal selection
MENU
NUGG
NUGG NUGG
NUGG NUGG
NUGG NUGG
NUGG
NUGG
NUGG NUGG
NUGG
Press ENTER key to enter meal selection
and return to normal display mode.
NOTE: Active timers will not change to the new meal selection until the timer(s) are stopped or
timed out and reset. Active timer(s) are stopped by pressing the timer key. The default menu at
start up is for breakfast items.
ENTER
PAGE
MENU
NUGG NUGG NUGG NUGG NUGG NUGG NUGG NUGG
NUGG NUGG NUGG NUGG
ENTER
PAGE