Frymaster Enodis BIELA14 LOV Series, Руководство оператора, Страница: 50 / 88

4-34
DANGER
When draining oil into an appropriate METAL container, make sure the container will
hold at least FOUR gallons (15 liters) or more.
11. When the
MSDU
or
METAL
container with a
capacity of
FOUR
gallons
(15 liters)
or larger is in
place, press the (
1
yes
) button to continue (see
Figure 248).
Figure 248 Figure 249
The drain valve opens and the oil is drained into the MSDU or METAL container.
The computer displays
disposing
for 20 seconds (see Figure 249).
The drain valve remains open and the computer displays
Vat empty (
see Figure 250) alternating with
yes
no
.
12. When the vat is empty, press the (
1 yes
) button
to continue (see Figure 251).
Figure 250 Figure 251
The computer displays
cln vat Complete
(see
Figure 252).
Figure 252 Figure 253
13. Clean the vat with a scrub brush and when complete press the (
1 yes
) button to continue (see
Figure 253). The drain valve closes.
If the oil system was set to JIB during initial setup, the
computer displays
manual fill pot
(see Figure
254)
.
Figure 254 igure 255
14. Press the (
1 yes
) button (see Figure 255) to continue.
The computer displays
off
(see Figure 256).
15. Follow the procedures starting with Step 3 on page 4-
32.
Figure 256
16. Fill frypot to be cleaned with water and boil-out solution. Referring to maintenance requirement
card (MRC14A) for McDonald’s boil-out procedure.
The computer displays
strt boil
, alternating with
yes no
(see Figure 257).
17. After the boil out solution and water has been added
to the frypot, press the (
1 yes
) button to start boil
out (see Figure 258).
Figure 257 Figure 258