Frost Fighter IHS 1500, Инструкция по установке, эксплуатации, техническому обслуживанию и перечень запасных частей

Страница: 16 / 30

TABLE I. RECOMMENDED LUBRICATION
Frequency of re-lubrication depends upon operating conditions. The bearing operating temperature is the
best index for determining a re-lubrication schedule. The following chart gives the frequency of re-lubrication
based upon continuous operation for various operating temperatures and can be used as a satisfactory guide
for determining when bearings should be re-lubricated.
TABLE II. LUBRICATION FREQUENCY
Ball Bearings Roller Bearings
Shaft Size
(inches)
Grease Charge
(ounces)
Shaft Size
(inches)
Grease Charge
(ounces)
1 – 1 ½ 0.15 1 – ½ to 1 – 1 1/16 0.32
Speed Temperature Cleanliness Greasing Interval
100 RPM Up to 120 F Clean 5 months
500 RPM Up to 130 F Clean 2 months
1000 RPM Up to 210 F Clean 2 weeks
1500 RPM Over 150 F Clean Weekly
Any speed Up to 150 F Dirty 1 week to 1 month
Any speed Over 150 F Dirty Daily to 1 week
Any speed Any temperature Very dirty Daily to 1 week
Any speed Any temperature Extreme conditions Daily to 1 week
15