Frontier MS2342 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 84

background image

SAFETY CHAIN

As required or when desired, the Manure Spreader should be equipped with a safety chain for transporting
the unit on a public highway. Refer to the Transport Chapter for details.

-23-

JACK

A jack is furnished with the Manure Spreader to support the machine when the tractor is disconnected
and to adjust the hitch clevis to the tractor drawbar for hookup. The jack should never be used to
support a loaded Manure Spreader

.

TELESCOPING PTO DRIVE

T

he telescoping PTO drive is designed to rotate freely inside

the drive shield tubes.
The telescoping PTO drive is provided with a spring-loaded
locking collar on one end to positively lock the drive connection
onto the tractor PTO shaft. Depress the locking collar, against
the spring tension, and slide the yoke onto tractor PTO shaft.
Release the locking collar and move the yoke ahead or back
until the lock engages into the groove on the shaft.

NOTE:

When the spreader is not attached to the tractor, the

PTO Drive can be conveniently supported by the chain
provided as shown. This position is used only when the
Manure Spreader is NOT in operation. Never transport the
Manure Spreader with the PTO in this position.

OPERATION

When the jack is not being used
to support the Manure Spreader,
it should be relocated to the
“storage” position located on the
left side of the Manure Spreader
as shown.

TRANSPORT LIGHTING

Connect the transport lighting cord that is standard equipment
to the lighting system 7 pin power receptacle (per SAEJ560B)
on your tractor. If your tractor is not equipped with the proper
receptacle, see your tractor dealer for details.

«
...
23
24
25
26
27
...
»

Содержание MS2342





















































































Отзывы:

Нет отзывов

Похожие инструкции для MS2342

Бренд: JARLTECH Страницы: 31

Бренд: Nedap Страницы: 21

MULTI-CARD 25-IN-1

Бренд: Lexar Страницы: 10

Бренд: HID Страницы: 2

Бренд: Gandy Страницы: 8

Бренд: BBPOS Страницы: 2

Бренд: Fimco Страницы: 12

Бренд: ZKTeco Страницы: 4

Бренд: ZKTeco Страницы: 27

Бренд: Omron Страницы: 2

Бренд: IBM Страницы: 13

Бренд: UIC Страницы: 166

Бренд: Land Pride Страницы: 32

Бренд: Craftsman Страницы: 8

Бренд: Uniform Industrial Страницы: 49

2600A-Plus Estate

Бренд: EarthWay Страницы: 5

Бренд: Roger Страницы: 15

Бренд: TECHFASS Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды