Fronius Selectiva 4.0 2040, Руководство по эксплуатации

Страница: 37 / 68

General options:
- Language
- Contrast
- Time (hh:mm:ss)
Time zone
Daylight saving time/standard time
- Date (dd:mm:yy)
- Charging cable length (m)
-
Charging cable cross-section (mm
2
)
- AC current consumption
- Unit for temperature values
- Code for entering the configuration menu activated/deactivated.
- Time interval for the parameters logged on the USB thumb drive (s).
- Reset statistics
- Reset history
Reset Settings
- With confirmation prompt ("OK?") for further confirmation.
First the screen appears in the basic
settings with display of date and time,
as well as the software version.
1
Use the "Up/Down" buttons to call up the following information:
- Device serial number as well as serial number and version of the config-
uration memory.
- PCB for control/power electronics: Hardware version and serial number.
- Software: Main software, secondary software, primary software and curve
block version.
Enter the configuration menu as follows:
1
Press the "Pause/Start" button.
A prompt for the code appears.
Enter the required code "1511" as fol-
lows:
1
Use the "Up/Down" buttons to enter the first digit of the code.
2
Press the "Menu" button to move to the next digit of the code.
3
Continue as described above until the complete code is entered.
37
EN-US