Fronius Selectiva 4.0 2040 Скачать руководство пользователя

Страница: 17 / 68

Wall and floor
mounting

WARNING!

Danger from incorrectly performed work and falling equipment.

This can result in severe personal injury and damage to property.

▶

The mounting must only be carried out by trained and qualified personnel.

▶

Follow the safety rules in the Operating Instructions of the battery charger.

Depending on the substrate, different dowels and screws are required. Therefore,
dowels and screws are not part of the scope of supply. The system installer is re-
sponsible for selecting the proper dowels and screws.

WARNING!

Danger from objects falling or toppling over.

This can result in severe personal injury and damage to property.

▶

Check that all screw connections are tightly fastened.

▶

Only use with the battery charger provided by the manufacturer.

▶

Mount the device horizontally.

▶

For wall mounting, the load bearing capacity of the wall must be sufficient.

Weight of the wall bracket:

2 kW (B1)

1.10 kg (2.43 lbs.)

3 kW (C1)

1.35 kg (2.98 lbs.)

TX25

EN-US

Содержание Selectiva 4.0 2040





































































Результаты поиска

Содержание Selectiva 4.0 2040

Отзывы:

Похожие инструкции для Selectiva 4.0 2040

Бренды по названию

Популярные бренды

Fronius Selectiva 4.0 2040, Руководство по эксплуатации

Результаты поиска

Содержание Selectiva 4.0 2040

Отзывы:

Похожие инструкции для Selectiva 4.0 2040

Бренды по названию

Популярные бренды