manualshive.com logo in svg

Fronius Selectiva 4.0 2040, Руководство по эксплуатации

Поделиться
Скачать
Fronius Selectiva 4.0 2040 Скачать руководство пользователя страница 33

Display

Overview of dis-
play modes

The device has the following display modes:

No.

Function

Standard mode

In standard mode, the display shows the charging parameters.

Statistics mode

Visualizes the frequency of the operating states of the device and
shows the total number of charges, as well as an overview of the abso-
lute and average Ah delivered and energy consumed per charge.

History mode

Provides information regarding the parameters of all stored charging
processes.

Configuration mode

Configuration mode enables all settings to be made for the device and
the charging process.

USB mode

USB mode supports a device update, the backup and uploading of
device configurations, as well as logging of charging parameters during
the charging process via USB thumb drive.

As long as a battery is connected to the battery charger, the charging process
can only be interrupted and resumed by pressing the "Pause/Start" button. It is
only possible to change the display modes with the "Menu" button, as described
in the following sections which explain the individual modes, after disconnecting
the battery from the battery charger.

While charging has been paused, however, a limited menu selection is available.
The display modes described in detail below are available in this case as follows:

Statistics mode and history mode remain unrestricted.

The following data can be called up in configuration mode:

-

Date and time

-

Device serial number

-

Hardware version and serial number

-

Software: Main software, secondary software, primary software and curve
block version

In USB mode, all functions except "Update" and "Load configuration" can be car-
ried out.

Standard mode

After connecting the mains plug to the electrical network, the display is automat-
ically in standard mode.

33

EN-US

Содержание Selectiva 4.0 2040





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды