168230.01EN_Version03
FROMM
It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2006
5
SAFETY INSTRUCTIONS
ATTENTION!
The following conditions have always to be satisfied, unless otherwise indicated in other
instructions in this manual.
•
This Weighting system has been delivered by FROMM Stretch Wrapping Division and may only be
applied for weighting of pallets which meet the requirements as mentioned in the description of the
machine. (See user manual).
Any other use of the machine as for the described purpose may cause danger due to damage to
the machine and/or the safety of the operator or other persons in the neighbourhood of the
machine.
•
Read this manual carefully before using the machine
•
The machine is not fit with components that involve special decommissioning problems.
•
Only personnel trained for the purpose may operate the machine
•
Use the emergency stop to halt the machine immediately
•
Only trained electricians may perform electrical work on the machine
•
When installing the machine, as a precaution, always check that the controls and safety systems are
correctly mounted and operating efficiently. If any malfunctions are noted, immediately stop the
production cycle and ask the authorized technical service to intervene
•
Examine the data-plates. lf they are in poor condition, replace them with utmost urgency, strictly and
directly contacting the authorized technical service or the Manufacturer
•
People should not step on to means of transport, unless indicated clearly otherwise
•
People should not find themselves above the means of transport
•
Do not place tools and components on the machine
•
Safety devices should not be bridged and put out of operation
•
The manufacturer will only make the machine ready for operation, when the electrical main
connection satisfies the standards applicable in the country of delivery
•
The supplier will do the training of the operating personnel. If not, the training will have to be done
properly by the company that takes care of the installation
SAFE
TY INSTRUCTI
O
NS
