background image

FROMM

 

168230.01EN_Version03 

It is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2006

 

 

 

 
GENERAL 

 

  This manual has been created to describe all functional capabilities of the 

Indicator

 and assist you 

during its installation and set up.  

 

  FOR EVERYTHING IN THIS MANUAL IS VALID, IF APPLIED! 

 

  For safety reasons the entire instruction manual should be read before setting in operation the 

machine/installation, solving failures and executing maintenance. 

 

  We particularly draw your attention to the chapters Safety Instructions and Warnings which point out 

the intended use and unsafe situations that could not be prevented in the design and manufacture of 
the weighting unit.  

 

  The duration of guarantee is provided the following are observed:  the uses for which the machine 

was designed, built and protected, in addition to recommendations, information - including matters of 
general knowledge - details plus the safety and health technical limits notified by the Manufacturer to 
the User by virtue of the operating use. 

 

The same holds true if non-original spare parts are utilized.

 

 

  For all the before mentioned reasons, we recommend that our customers always notify the Service 

Department. 

 

 
SERVICE DEPARTMENT 

Please contact, in case of problems: 

 

 

 
 
 
 

SPARE PARTS 

 

Spare parts can be ordered from: 

 
 
 

 
 
 
 

 

GENERAL 

Содержание FS 2 Series
















Отзывы: