manualshive.com logo in svg

Froling Lambdamat LM 1000 SPS, Руководство по эксплуатации

Поделиться
Скачать
Froling Lambdamat LM 1000 SPS Скачать руководство пользователя страница 20

2.7 Residual risks

WARNING

When touching hot surfaces:
Severe burns are possible on hot surfaces and the flue gas pipe!

When work is carried out on the boiler:

❒ Shut down the boiler in a controlled way (operating status "Switched off OFF")

and allow it to cool down

❒ Protective gloves must generally be worn for work on the boiler, and it should

only be operated using the handles provided

❒ Insulate the flue pipes or simply avoid touching them during operation.

 

 

WARNING

Opening the door to the combustion or burning chamber, or the cleaning door or
lids during operation
may result in injury or damage or flue gas generation!

Therefore:

❒ Do not open any doors or lids while the boiler is in operation!

 

 

WARNING

If non-permitted fuel types are used:
Non-standard fuels can cause serious faults in combustion (e.g. spontaneous

combustion of carbonisation gases / flash fires) which can lead to serious

accidents!

Take the following precautions:

❒ Only use fuels specified in the "Permitted fuels" section of these operating

instructions.

 

 

 

 

2

Safety

Residual risks

20

Froling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com

Содержание Lambdamat LM 1000 SPS





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды