41
10.3
L
ONG STOP PERIOD
If the unit is to remain unused for a long period of time, the following operations should be performed:
1.
Turn off the freezer.
2.
Unplug the mains lead.
3.
Defrost, clean and wipe the chamber.
4.
Leave the door ajar to avoid any unpleasant odours.
5.
Remove valve's and allow to completely dry.
10.4
A
NNUAL MAINTENANCE
In the same way that motorists service their vehicles to keep them in the best possible working order, a freezer requires
a minimum level of maintenance to keep it in good working condition.
Accordingly, an annual maintenance is recommended, to check various aspects (performance, safety, alarms), to pre-
empt certain failures and to carry out preventive actions to minimise the risks of unexpected shutdowns. The customer’s
maintenance department could perform this service as long as a Froilabo technician or a local representative has
properly trained them, and the appropriate equipment is available. Notwithstanding the above, any serious issues will
require a visit from our maintenance department, or assistance and diagnosis by phone.
Inspection points:
-
Fully clean the condenser and replace the filter.
-
Check the refrigerant load.
-
Check the compressor current level.
-
Check the safety mechanisms, alarms and thermostats.
-
Check all mechanical parts (latches, chamber fixtures)
-
Check the internal freezer temperature.
-
Check the refrigerating circuit is leak-proof.
-
Check the compressor dampers (vibration reduction).
-
Replace the recorder pen.
-
Check the fan bearings.
Depending on the type of service contract, Froilabo undertakes to respond within set lead times in the event of a failure.
Please send an email to the after sales service with the maintenance contract demand.
