9
After stopping the freezer completely, remove the valve foam to dry. Before restarting the freezer, replace the dry foam.
After CO2 or LN2 injection, it is necessary to dismantle the decompression valve and reposition the inner circular silicone
membrane properly in order to ensure the correct sealing inside of the valve.
Heating door seal:
Froilabo freezers are equipped with a
heating door seal
to prevent the formation of ice and thus maintain an optimal
seal of the freezer.
Refer to the "Maintenance, cleaning and decontamination" section for cleaning the door seal
.
Air filter:
In order to maintain the cooling performance of the device and to preserve the compressors lifespan, an air filter is
placed in front of the condenser.
It is necessary to dust or wash this filter as frequently as necessary.
A device must never operate without a filter.
Clamping handle:
The device has a progressive tightening handle. Its double action makes it easier to open and close the door. The freezer
door can be locked thanks to the key lock located on the side of the handle.
4.6
T
ECHNICAL CHARACTERISTICES AND REFRIGERATION SYSTEM
Technical characteristics:
FREEZER MODEL
BM340
BM515
BM690
-86
-45
-86
-45
-86
-45
GENERALITIES
Gross volume (litres)
340
340
515
515
690
690
Number of compartments
2
2
3
3
4
4
Freezer mass (kg)
223
178
267
222
330
285
Maximum power consumption
230V (Watts) (BoSS System)
1500
1500
2150
1500
2150
1500
Power consumption* 230V, 50
Hz (Watts)
900
1000
1150
1000
1150
1000
