64
3.Set up Guide
3.1 Pre Installation Checkout
To complete assembly you will need a Philips screwdriver (size PH0) and a wrench (size M5;
included in package).
Before installing the weather station on the place of operation, we recommend placing the
weather station at a temporary location with easy access for one week. This will let you check
all functions, ensure proper operation, and get familiar with the weather station and its
calibration procedures. During this time, you can also test the wireless range between the main
unit and the integrated wireless sensor.
Attention:
Follow suggested order for battery installation (outdoor sensor first, console second)
Ensure batteries are installed with correct polarity (+/-)
Do not mix old and new batteries
Do not use rechargeable batteries
If outdoor temperature may go below 32F or 0C for prolonged periods, Lithium based
batteries are suggested over alkaline type batteries for the outdoor sensor array
3.2 Site Survey
Perform a site survey before installing the weather station. Consider the following:
1. Avoid radiant heat transfer from buildings and structures. In general, install the sensor
array at least 5’ or 1.52m from any building, structure, ground, or roof top.
2. Avoid wind and rain obstructions. The rule of thumb is to install the sensor array at
least four times the distance of the height of the tallest obstruction. For example, if the
building is 20’ or 6.10m tall and the mounting pole is 6’ or 1.83m tall, install the sensor
array 4 x (20 – 6)’ = 56’ or 4 x (6.1-1.83)=17.08m away.
3. Installing the weather station over sprinkler systems or other unnatural vegetation may
affect temperature and humidity readings. We suggest mounting the sensor array over
natural vegetation.
4. Radio Interference. Computers, radios, televisions and other sources can interfere with
radio communications between the sensor array and console. Please take this into
consideration when choosing console or mounting locations. Make sure your display
console is at least five feet or 1.52 meter away from any electronic device to avoid
interference.
