Fritsch PULVERISETTE 1 premium Series, Руководство по эксплуатации

Страница: 41 / 58

2. To replace the blocks (10), undo the cylinder-head screws using a
hex wrench (i). Unscrew the screws by about 5 to 10mm. Do not
remove the screws completely; otherwise, the blocks will fall into
the grinding chamber.
3. Now use a mallet (k) to gently knock the hex wrench (i), which is
inserted in the cylinder-head screw. The block is pushed by the
dowel pins and is suspended from the cylinder-head screw.
4. Open the lid (1).
5. Hold the released block firmly and unscrew the cylinder-head
screw completely and replace the block.
6. To install the block, simply insert it with the dowel pins in the holes
of the lid (1).
7. Then, re-attach the blocks with the cylinder-head screw to the lid
(1).
Accessories
- 41 -