Frigomat AGG.2014 Series, Руководство по эксплуатации и обслуживанию

Страница: 48 / 96

47 - ENGLISH
We suggest using the following sanitising
solution:
Ecolab P3 Topax-san
(4% dilution = 200 ml every 5 litres of water).
SANITIZING REMOVABLE PARTS
PREPARATION OF WASHING TUB
•
Wash your hands well and/or wear disposable
gloves.
•
Fill a clean tub with a sufficient amount of drinking
water at approximately 50°C and the sanitizer.
•
Prepare the supplied brush and the OR disassembly
device and immerse them in the solution.
REMOVING AND CLEANING THE DOOR
•
Lift the blocking lever and open the door by rotating it
to the left.
•
Pull the hinge pin upwards and remove the door,
holding it with both hands.
Handle the door with great care: because of its great
weight, should it fall, it could cause injuries to staff and
damages to things.
•
Rest the door on a clean work surface and
disassemble its parts:
1. Remove the plastic lid from the hopper.
2. Unscrew and remove the plastic knob.
3. Remove the steel guide controlling the dispenser
disk from the guides.
4. Remove the spring.
5. Remove the dispenser disk.
6. Use the OR disassembly device to remove the 2
OR gaskets from their place.
•
Immerse the previously disassembled components
into the tub with the sanitising solution and brush the
surfaces with care. Pay special attention to the safety
grid and gaskets.
REMOVING AND CLEANING BEATER