To set the stopping time
1. Push the TIMER OFF button and the remote controller will show TIMER OFF,
the last set time for the stopping operation and the signal "h" will be shown
on the DIGITAL DISPLAY area. You are now ready to reset the time of the
STOP operation.
2. Push the TIMER OFF button again to set the time you want to stop the
operation.
3. After setting the TIMER OFF ,there will be a one-half second delay before the
remote controller transmits the signal to the air conditioner. Then, after
approximately another 2 seconds, the signal "h" disappears and the set
temperature will re-appear on the digital display.
Optimal operation
To achieve optimal performance, please note the following:
1. Adjust the air flow direction correctly so that it is not directed on people.
2. Adjust the temperature to achieve the highest comfort level. Do not adjust
the unit to excessive temperature levels.
3. Close doors and windows on COOL or HEAT modes, or performance may be
reduced.
4. Use TIMER ON button on the remote controller to select a time you want to
start your air conditioner.
5. Do not put any object near air inlet or air outlet, as the efficiency of the air
conditioner may be reduced and the air conditioner may stop running.
6. Clean the air filter periodically, otherwise cooling or heating performance may
be reduced.
7. Do not operate unit with horizontal louvre in closed position.
Exemples:
6h
(Temp On)
OFF
ON
6h
(Temp Off)
ON
OFF
12h
(Temp Off)
ON
OFF
ON
14h
(Temp On)
20h
(Temp On)
ONN
OFF
23h
(Temp Off)
OFF
41
42
SLEEP mode
Press the sleep button to activate the
sleep mode. To deactivate, press the
button again.
Cool only mode:
• The indoor unit fan operates at a
low velocity.
• After and hour of operation, the
adjusted temperature will increase
1º C. After, the unit keeps
operating 2ºC above the adjusted
temperature.
In heating mode (some models):
• The indoor unit fan operates at a
low velocity.
• After and hour of operation, the
adjusted temperature will decrease
1º C. After, the unit keeps
operating 2º C below the adjusted
temperature.
1 °C
1 hour
1 hour
S
e
t
te
m
p
e
ra
tu
re
SLEEP FUNCTION (Cooling mode)
1 °C
1 °C
1 hour
1 hour
SLEEP FUNCTION (Heating mode)
7 hours
1 °C
S
e
t
t
e
m
p
e
ra
tu
re
Sleep function is only availaible in the
Cool/Heat and AUTO mode.
TIMER Operation
TIMER button can set the auto-on time of the unit.
To set the starting time
1. Push the TIMER ON button, then the remote controller shows TIMER ON ,
the last set time for the starting operation and the signal "h" will be shown on
the DIGITAL DISPLAY area. You are now ready to reset the time to START the
operation.
2. Push the TIMER ON button again to set desired unit start time.
3. After setting the TIMER ON ,there will be a one-half second delay before the
remote controller transmits the signal to the air conditioner. Then, after
approximately another 2 seconds, the signal "h" disappears and the set
temperature will re-appear on the digital display.
Attention
Содержание FRS095YC1
Страница 28: ...54 53 Notes Notes ...