Frigicoll Kaysun KEM-30 DRS4, Инструкция для владельца и по установке

Страница: 47 / 48

43
Table 13-4
Information requirements for heat pump space heaters and heat pump combination heaters
Model (s): KEM-60 DRS4
Air-to-water heat pump: [yes]
Water-to-water heat pump: [yes/no]
Brine-to-water heat pump: [yes/no]
Low-temperature heat pump: [yes/no]
Equipped with a supplementary heater: [yes/no]
Heat pump combination heater: [yes/no]
For low-temperature heat pumps, parameters shall be declared for low-temperature application. Otherwise, parameters shall be
declared for medium-temperature application. Parameters shall be declared for average climate conditions.
Item
Symbol Value Unit Item Symbol Value Unit
Rated heat output
(3)
at Tdesignh =
-10 (-11) °C
Prated
=Pdesignh
36.55 kW
Seasonal space heating
energy efficiency
η
s
151.40 %
Seasonal coefficient of performance SCOP 3.86 --
Active mode coef. of
performance
SCOP
on
-- --
Net seasonal coef. of
performance
SCOP
net
-- --
T
j
= -7°C Pdh 32.33 kW T
j
= -7°C COPd 2.59 --
T
j
= +2°C Pdh 20.64 kW T
j
= +2°C COPd 3.76 --
T
j
= +7°C Pdh 12.89 kW T
j
= +7°C COPd 5.04 --
T
j
= +12°C Pdh 14.18 kW T
j
= +12°C COPd 6.02 --
T
j
= bivalent temperature Pdh 32.33 kW T
j
= bivalent temperature COPd 2.59 --
T
j
= operation limit temperature Pdh 35.42 kW
T
j
=operation limit
temperature
COPd 2.28 --
For air-to-water heat pumps:
T
j
= – 15 °C (if TOL < – 20 °C)
Pdh -- kW
For air-to-water heat pumps:
T
j
=–15°C (if TOL<–20°C)
COPd -- --
Bivalent temperature (maximum
+2°C)
Tbiv -10 °C
For air-to-water HP:
Operation limit temperature
(maximum-7°C)
TOL -10 °C
Cycling interval capacity for heating
at T
j
= -7°C
Pcych -- kW
Degradation coefficient (4) at T= -7°C Cdh -- --
Heating water operating limit
temperature
WTOL -- °C
Cycling interval capacity for heating
at T
j
=+2°C
Pcych -- kW
Degradation coefficient
(4)
at T= +2°C Cdh -- --
Cycling interval efficiency
at T
j
= +7°C
COPcyc -- --
Cycling interval capacity for heating
at T
j
= +7°C
Pcych -- kW
Cycling interval capacity for
heating at T
j
=+12°C
COPcyc -- --
Degradation coefficient
(4)
at T
j
= +7°C Cdh -- --
Cycling interval efficiency
at T
j
= +7°C
COPcyc -- --
Cycling interval capacity for heating
at T =+12°C
Pcych -- kW
Degradation coefficient (4) at T
j
= +12°C Cdh -- --
Cycling interval capacity for
heating at T
j
=+12°C
COPcyc -- --
Power consumption in modes other than active mode
Off mode P
OFF
0.035 kW
Supplementary heater (to be declared even if not
provided in the unit)
Thermostat-off mode P
TO
0.409 kW Rated heat output (3)
Psup =sup
(Tj)
-- kW
Standby mode P
SB
0.035 kW Type of energy input
Crankcase heater mode P
CK
0 kW Outdoor heat exchanger
Other items
For air-to-water HP: Rated
air flow rate
Q
airsource
24000 m
3
/h
Capacity control Fixed/Variable Variable
For water-to-water: Rated
water flow rate
Q
watersource
x m
3
/h
Sound power level, indoors L
WA
x dB (A)
Sound power level, outdoors L
WA
86 dB (A) For brine-to-water: Rated
brine flow rate
Q
brinesource
x m
3
/h
Contact details Name and address of the manufacturer or its authorised representative .
(1) For heat pump space heaters and heat pump combination heaters, the rated heat output Prated is equal to the design load for
heating Pdesignh, and the rated heat output of a supplementary heater Psup is equal to the supplementary capacity for heating
sup (Tj).
(2) If Cdh is not determined by measurement then the default degradation coefficient is Cdh = 0,9.
16127100A05390 MD18IU-015AW(DZ-1)