Friendly Robotics Robomow RL1000, Инструкция по эксплуатации и безопасности

Страница: 56 / 73

56
Set entry points
Pres GO to learn
Back to default
Press GO
Entry points on
Press GO
Entry Points
Press GO
Press ‘GO’ Press ‘GO’
Weekly program
Press GO
Time: Mo 10:35
Press GO
Press ‘GO’
Docking options
Press GO
Entry points
Press GO
Auto depart on
Press GO
Skip next depart on
Press GO
Weekly program
Press GO
Time: Mo 10:35
Press GO
Press ‘GO’
Docking options
Press GO
Entry points
Press GO
Auto depart on
Press GO
Skip next depart on
Press GO
6.4 Docking Options (for Docking Station only)
Pressing ‘GO’ at the ‘ Docking options’ display will open the option to scroll between the following
menus (Figure 6.8):
For more details about the ‘
Time ’ and ‘ Weekly program’ settings, see chapter 4.1 and 4.2.
6.4.1 Entry Points
‘ Entry points’ are defined as the points, where the mower leaves the Edge and turns into the lawn to
mow the inner area. In order to ensure better area coverage in mowing, the mower has default of three
different entry points. The ‘
Entry points’ option enables to set different entry points from those set by
the factory to your lawn.
Under the ‘
Entry points’ display you can find the following three options (figure 6.9):
Set Entry Points
It is possible to set up to four points (includes the Docking Station itself, which is always defined as
entry point number one and cannot be cancelled).
Place the mower in the Docking Station when the Manual Controller in its place and follow the steps
below (Figure 6.10) in order to set the Entry Points:
Figure 6.8
Docking Options
Figure 6.9