Friendly Robotics Robomow RL1000 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 73

background image

37

Chapter 3

Manual and Automatic Operation

3.1 Activating The Perimeter Switch – Docking Zone

Area/zone with Docking Station

If the Robomow is operated from the Docking Station in automatic or manual-depart (see
paragraphs 3.2 and 3.3), the Robomow will automatically switch the Perimeter Switch at the
Docking Station Control Panel on and off to coincide with depart and dock events.

3.2 Manual Depart

Manual Depart mode can be used in cases such as the following:

- Mowing the lawn at times other than when programmed.
- When the lawn is occupied and the yard must be cleared of debris, objects, pets or people first.

For initiating a manual start for mowing, press the ‘GO’ button

once

to start the sequence:

1. Robomow will depart the Docking Station and automatically follow the perimeter wire one pass

around the perimeter until it reaches the Docking Station. It will briefly start to dock, but then
reverse out and move back to continue the mowing of the inner area.

2. Robomow will automatically determine the entry point into the lawn from the perimeter wire. A

‘Searching entry’ message is displayed on the Manual Controller while it is searching for the
entry point into the lawn. The RL1000 is programmed for three different entry points into the
lawn, at specified distances from the Docking Station. It will go to the next entry point with each
operation until it begins at location one again.

To skip the edge mowing process, press the ‘GO’ button

twice

when initiating manual depart

and mowing.

3.3 Automatic Depart

Automatic Depart mode is used as fully automatic solution to maintain your lawn.

This mode enables you to set a weekly program, where the mower will automatically depart to
mow and dock when finished, at days and times you have scheduled.

To set the weekly program refer to Chapter 4, Setting the Weekly Program.

3.4 Returning to the Docking Station

Automatic Docking

The Robomow automatically returns to the Docking Station at the end of every operation. It will
recharge and stay ready for the next scheduled departure time that was scheduled.

‘Go to Dock’ option

You can manually send the mower to the Docking Station from any point in the lawn.

«
...
35
36
37
38
39
...
»

Содержание Robomow RL1000










































































Отзывы:

Нет отзывов

Похожие инструкции для Robomow RL1000

PowerMax 1200/32

Бренд: Gardena Страницы: 352

Бренд: Gardif Страницы: 21

Бренд: Yard Machines Страницы: 32

YP21KH42 (96041031300)

Бренд: Yard Pro Страницы: 20

Бренд: MTD Страницы: 6

Бренд: Qualcast Страницы: 24

ZTR 5000 Series

Бренд: Dixon Страницы: 70

Бренд: Bad Boy Страницы: 48

Бренд: Barbieri Страницы: 2

Бренд: Yardworks Страницы: 36

Бренд: Parkside Страницы: 124

Бренд: Toro Страницы: 60

Бренд: Cub Cadet Commercial Страницы: 16

Бренд: Yazoo/Kees Страницы: 84

Бренд: Black+Decker Страницы: 12

Бренд: Flymo Страницы: 55

Бренд: Shibaura Страницы: 219

Бренд: Feider Machines Страницы: 27

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды