EU-Type Examination Certificate
[2]
EQUIPMENT OR PROTECTIVE SYSTEM INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES DIRECTIVE
2014/34/
EU
[3]
EU-Type Examination Certificate Number:
Presafe 15 ATEX 7676X
Issue 0
[4]
Product:
Fan Heater Assembly SWX Ex 12 and SWX Ex 22.
[5]
Manufacturer:
FRICO AB
[6]
Address:
Industrivägen 41,
43361 Sävedalen
Sweden.
[7]
This product and any acceptable variation thereto is specified in the schedule to this certificate and the
documents therein referred to.
[8]
DNV Nemko Presafe AS, notified body number 2460, in accordance with Article 17 of Directive
2014/34/EU of the European Parliament and of the Council, dated 26 February 2014, certifies that this
product has been found to comply with the Essential Health and Safety Requirements relating to the
design and construction of products intended for use in potentially explosive atmospheres given in
Annex II to the Directive.
The examination and test results are recorded in confidential reports listed in section 16.
[9]
Compliance with the Essential Health and Safety Requirements has been assured by compliance with:
EN 60079-0:2012, EN 60079-7:2007,
EN 14986:2007
,
EN 13463-1:2009 and EN 13463-5:2011.
[10]
If the sign “X” is placed after the certificate number, it indicates that the product is subject to the
Specific Conditions of Use specified in the schedule to this certificate.
[11]
This EU - TYPE EXAMINATION CERTIFICATE relates only to the design and construction of the specified
product. Further requirements of the Directive apply to the manufacturing process and supply of this
product. These are not covered by this certificate.
[12]
The marking of the product shall include the following:
II 2 G c
Ex e IIB T4 Gb
____________________________
Asle Kaastad
For DNV Nemko Presafe AS
Information on electronic signature www.presafe.com
PROD 021
Date of issue:
2017-01-27
This certificate may only be reproduced in its entirety and without any change, schedule included.
1 of 3
DNV Nemko Presafe AS,
Gaustadalléen 30, 0373 Oslo, Norway
EU-Type Examination Certificate
[13]
Schedule
[14] EU-TYPE EXAMINATION CERTIFICATE No.:
Presafe 15 ATEX 7676X
Issue 0
[15] Description of Product
SWX Ex is a hot water fan heaters for hazardous area. This fan heater is of two sizes SWX Ex 12 and
SWX Ex 22. SWX Ex has been developed specifically for heating the air in environments with
occasional danger of explosion with maximum inlet water temperature of 125
°C
and the ambient
temperature of
-20 °C to +40 °C
. The fan Heater assembly includes the Ex e certified fan motors,
which is supplied with Ex class fan motor Junction box. The fan motor is fitted with PTC thermistors
to protect
against overheating, and the installation also requires an external thermistor motor
protection, thus connected to motor
protector U-EK230E and a contactor placed in the safe area.
The Fan heater chassis, wall bracket and air deflector is made of stainless steel EN 1.4016 or EN
1.4404 with thickness between 1 to 1,5mm. The IP class included for the Fan motor is IP 44. The
water supply pipe is connected to the lower pipe on the heater and outlet pipe to the upper pipe of
the fan heater with
connection diameter is 22 mm on SWX Ex12 and 28 mm on SWX Ex22. The fan
heater are mounted with pipes facing left to right, when the fan heaters is mounted with pipes
facing right then the air deflector must be turned for the air to deflect downwards.
Type designation
SWX Ex 12 & SWX Ex 22.
Electrical Data
3-230/400V 50 Hz 0,43/0,25A
Degrees of protection (IP Code)
IP 44 Fan Motor.
Ambient temperature:
-
20°C to +40°C
2 of 3
DNV Nemko Presafe AS,
Gaustadalléen 30, 0373 Oslo, Norway
Содержание SWX EX12
Страница 15: ...77 SWX EX12 SWX EX22 ...
