Frico SLW400, Оригинальное руководство пользователя

Страница: 20 / 27

S I U
INSTRUCTION MANUAL
SLW
45
Key/Display Function
Air flow direction control
When this button is pressed, it is possible to set the continuous oscillation of the air
outlet mobile deflector, in which case the symbol will be shown on the display, or to lock
it into any position.
IMPORTANT: The mobile deflector must never be manually forced. In cooling and
heating mode, the position of the deflector is reset every 30 minutes so as to prevent
the formation of dew.
Fan speed control
When this button is pressed multiple times, the speed changes in the following order:
Minimum, Medium, Maximum and Automatic.
The higher the set speed, the greater the performance of the unit, but the lesser its
silence. If Automatic mode is set (visible by the scrolling of the 3 speed bars on the
display) the on-board micro-processor automatically regulates the speed, which will
be higher in accordance with the difference between the room temperature and the
set temperature. The speed is then automatically reduced as the room temperature
progressively reaches the set one. In dehumidification and nighttime comfort mode,
speed control is not possible insofar as the unit can only operate at low speed.
Setting the Timer function
The unit logic offers the User the possibility to programme its activation or deactivation,
as preferred.
When the fan coil unit is turned on, it is possible to programme its deactivation by
pressing the Timer key, followed by the number of hours (from 1 to 24) after which time
the unit will go into standby mode.
When the fan coil unit is turned off, it is possible to programme its activation by
pressing the Timer key, followed by the number of hours (from 1 to 24) after which time
the unit will turn on.
Subsequent pressing of key for confirmation.
Locking the touch screen display keys
If the Timer symbol is pressed for 3 seconds on the touch screen display, the key-lock
function is activated. All actions are prohibited to the user. The standby symbol pulsates
at a frequency of 1 second.
To deactivate the lock, press the Timer symbol again for 3 seconds on the touch screen
display.
Any selection made from the remote control will deactivate the lock!
GB