GB
12
Make electrical connections according to the requirements set
out in sections General Warnings and Foundamental Safety
Rules by reference to the patterns present in the installation and
accessories manuals.
Before doing any work, make sure the power is switched off.
The unit must be connected to the mains through a multipolar
switch with minimum contact opening of at least 3mm or with a
dewice that allows the complete disconnection from the device
under the overvoltage conditions category III.
Electrical connections
Mounting of valve kits
The convector must be mounted with Frico valve kits for SL/SLS
see separate manuals.
For SL, valve kit V20687, art nr. 76648
For SLS, valve kit V20661, art nr. 18686
