B
A
D
A
B
C
A
B
C
D
A
A
B
B
GB
8
- On the left-hand side lift the cover that protects the screw,
loosen the screw that fixes the left panel, then move it slightly
to the left and lift it up.
-
On the opposite side, lift the cover that protects the screw and
unscrew it.
-
Move the side panel slightly to the right and lift it out.
When mounting on the floor with support feet, refer to the
individual instructions leaflets supplied and the relative manual for
the mounting of the feet.
Using the paper template, trace the position of the two fixing
brackets on the wall. Use a suitable drill to make the holes with and
insert the toggle bolts (2 for each bracket); fix the two brackets. Do
not over-tighten the screws so that the brackets can be adjusted
with a spirit level.
Fully tighten the four screws to block the two brackets.
Check the stability by manually moving the brackets to the right
and to the left, up and down.
Mount the unit, checking that it fits correctly onto the brackets and
checking that it is stable.
cover
fixing screws
left panel
right panel
Side opening
Vertical floor or wall installation
A
toggle bolts
B
brackets
