FRENCH FITNESS FF-X4 Скачать руководство пользователя страница 12

Страница: 12 / 30

Descriptions of LEFT and RIGHT are from the point of view of standing

behind the equipment facing the front

ASSEMBLY DIAGRAM 7

USE A PARTNER TO HELP WITH THIS STEP

REMEMBER: Only hand tighten all nuts and bolts until whole

&&Ͳ

is assembled

Attach the FRONT COVER (30) to the FRONT PRESS BASE (9) using six RIVETS (70). Insert a BUSHING (25) into each

side of the base.

(See the exploded diagram for more detail, skip this step if pre-assembled)

Insert a HANDLE GRIP (35) into each side of the FRONT PRESS (39). Insert

an END CAP (61) to

the end of each handle

and an END CAP (64) on the ends of the FRONT PRESS (39)

. Insert a MAGNET (75) into each rear side of the BUTTERFLY

(39)

(See the exploded diagram for more detail, skip this step if pre-assembled)

Insert a BUSHING (54) into each side of the axel hole near the front of the UPPER FRAME (4). Ensuring correct

orientation, position the FRONT PRESS BASE (9) over the axel hole.

Slide the UPPER AXEL (31) through the FRONT PRESS BASE (9) and the UPPER FRAME (4) from left to right. Connect

using a HEX BOLT M10X16 (98) and a WASHER (93)

Ensuring correct orientation, position the FRONT PRESS (39) over the holes at the base

of the FRONT PRESS BASE (9)

Slide the MID AXEL (12) through the FRONT PRESS (39) and the FRONT PRESS BASE (9). Connect using two HEX BOLT

M10X16 (98) and two WASHER (93). Insert two ALLEN BOLT M8X16 (121) to the rear holes on the BUTTERFLY (39)

Connect a LOCK KNOB (33) through the upper right side of the FRONT PRESS (39)

Behind each butterfly handle, connect vertically upward a SHORT CONNECTABLE CABLE (44), using a HEX BOLT

M10X25 (100), two WASHER10 (92) and an AIRCRAFT NUT M10 (97) on each side.

Содержание FF-X4































Результаты поиска

Содержание FF-X4

Отзывы:

Похожие инструкции для FF-X4

Бренды по названию

Популярные бренды

FRENCH FITNESS FF-X4, Руководство пользователя

Результаты поиска

Содержание FF-X4

Отзывы:

Похожие инструкции для FF-X4

Бренды по названию

Популярные бренды