FRENCH FITNESS FF-X4, Руководство пользователя

Страница: 22 / 30

Descriptions of LEFT and RIGHT are from the point of view of standing
behind the equipment facing the front 22
ASSEMBLY DIAGRAM 1 USE A PARTNER TO HELP WITH THIS STEP
REMEMBER: Only hand tighten all nuts and bolts until whole
&&Ͳ X ϰ
is assembled
1. Position a WEIGHT STACK COVER (27) over the front and rear sides of the weight stack.
2. Attach the top of each WEIGHT STACK COVER (27) to the UPPER GUIDE ROD FRAME (8) using two ALLEN BOLT M8X9
(115) and two WASHER8 (91)
3. Attach the base of each WEIGHT STACK COVER (27) to the REAR BASE FRAME (1) using two ALLEN BOLT M8X9 (115)
and two WASHER8 (91)
4. Attach two SHORT HANDLE GRIPS (71) and two END CAP (61) to each end of the SHIVER BAR (15). Attach two LONG
HANDLE GRIPS (72) and two END CAP (61) to each end of the LAT BAR (14) (Skip this step if pre-assembled)
5. Attach a HOOK (78) to each end of the LONG CHAIN (89). Attach one hook to the lower end of PULL CABLE (40).
Attach the other hook to the SHIVER BAR (15)
6. Attach a HOOK (78) to each end of the SHORT CHAIN (90). Attach one hook to the front end of UPPER CABLE (43).
Attach the other hook to the LAT BAR (14)
7. Attach a HOOK (78) to the end of upper end of PULL CABLE (40) and clip the STRAP (80) into the same hook.
8. Attach a HOOK (78) onto both ends of BUTTERFLY CABLE (41). Clip an ADJUSTABLE SINGLE HANDLE (81) into each
hook.