FRENCH FITNESS FF-X4, Руководство пользователя

Страница: 14 / 30

Descriptions of LEFT and RIGHT are from the point of view of standing
behind the equipment facing the front 14
ASSEMBLY DIAGRAM 9 USE A PARTNER TO HELP WITH THIS STEP
REMEMBER: Only hand tighten all nuts and bolts until whole
&&Ͳ X ϰ
is assembled
1. Attach the UPPER BACKREST BOARD (46) to the FRONT VERTICAL FRAME (3) using two ALLEN BOLT (117) and two
WASHER8 (91)
2. Attach the LOWER BACKREST BOARD (47) to the BACK REST SUPPORT (20) using two ALLEN BOLT M8X25 (118) and
two WASHER8 (91)
3. Ensuring correct orientation, slot the assemble support and board (20&47) into the ADJUSTABLE BACKREST SUPPORT
(19), securing it with the pre-positioned LOCK KNOB (64)
4. Attach SEAT PAD (45) to the SEAT SUPPORT (7) using two ALLEN BOLT M8X45 (116) and two WASHER8 (91)
5. Insert a SLEEVE (84) and an END CAP (56) into the base of SEAT SUPPORT (7) (Skip this step if pre-assembled)
6. Slot the assembled seat (45&7) into the hollow post on the FRONT SUPPORT FRAME (6), securing it with the pre-
positioned LOCK KNOB (64)
7. Position the FOOT PLATE (10) over the holes at the front of the BASE FRAME (13). Slide the FOOT PLATE TUBE (32)
through the plate and the frame and secure from above with an ALLEN BOLT M8X16 (121)