X
Release lever
=
.
X
To adjust the seat cushion angle: pull
lever
;
upwards and hold it.
X
Apply force to/relieve load on the seat
cushion or backrest in order to move it into
the desired position.
X
Release lever
;
.
X
To adjust the seat height: pull lever
B
up
or push it down one level.
The seat is raised or lowered by one level.
X
To adjust the damper: set the damper
using lever
A
.
X
To use the EASY-ENTRY/EXIT feature:
press lever
?
downwards.
The seat is lowered completely.
X
Pull lever
?
upwards.
The seat returns to the previously set
height.
i
You can adjust the backrest contour (lum-
bar support) to support your spine.
X
To adjust the backrest contour: press the
upper or lower section of switch
E
.
The lower seat backrest contour is
increased or decreased.
X
Press the upper or lower section of switch
C
.
The upper seat backrest contour is
increased or decreased.
Static co-driver's seat
Example: static seat
The static seat cannot be adjusted.
Adjusting the multifunction steering
wheel
G
WARNING
You could lose control of your vehicle if you
do the following while driving:
R
adjust the driver's seat, steering wheel or
mirrors
R
fasten the seat belt
There is a risk of an accident.
Adjust the driver's seat, steering wheel or
mirrors and fasten your seat belt before
starting the engine.
G
WARNING
If the steering wheel is unlocked while the
vehicle is in motion, it could change position
unexpectedly. This could cause you to lose
control of the vehicle. There is a risk of an
accident.
Before starting off, make sure the steering
wheel is locked. Never unlock the steering
wheel while the vehicle is in motion.
If sufficient supply pressure is available, you
can adjust the steering wheel.
X
Stop the vehicle.
X
Apply the parking brake.
X
To adjust: press lower section
;
of the
button.
The steering column is unlocked.
X
Adjust the multifunction steering wheel
height and angle.
X
Press upper section
:
of the button.
The steering column is locked.
Adjusting the multifunction steering wheel
47
Driv
er
's
work
st
at
ion
Z