Freggia CHLA9I, Руководство пользователя

Страница: 13 / 40

GB
13
COMMANDS
13
With this control it is possible to manage the appliance also with
a remote control to be requested as accessory.
Power Button (A) = the on / off button switches on and off the whole
hood (motor and lights). By pressing the button, the motor starts at 1st
speed.
Fan Speed button (B) = From the OFF position, press once for the 1st speed, twice for the 2nd speed and three times
for the 3rd speed. In order to activate the INTENSIVE SPEED, press the button for 5 seconds regardless of the status of
the hood. For each speed only the led indicating the set speed will turn on. The intensive speed is indicated by the
fl ashing of the led indicating speed 3. The duration of the intensive speed is 10 minutes; after this time the hood goes
back to the last set speed. In order to remove the intensive speed press the power button and the hood will switch off ,
or press the Fan speed button and the speed goes back to the previously set one. Speed of the hood with cyclic trend.
Light button (C) = There are three light levels: High, medium, low. From the off position press once for the high level,
twice for the medium level, three times for the low level and four times to turn the lights off . The level of the lights has
a cyclic trend: High, medium, low, off .
Timer button (D) = With any type of speed (excluding the intensive speed), by pressing the button, the timer function
is activated for 15 minutes. After this time has elapsed, the hood will turn off (motor and any light on).
Lights indicator (E) = The lights indicator will switch on when the lights are on at any level.
ANTI-GREASE/ACTIVE CHARCOAL FILTERS SATURATION
Filters indicator (F) = After 30 minutes of operation, the led of the fi lters indicator will switch on, not fl ashing
indicating that the anti-grease fi lters have to be washed. To reset the function (with the hood off ), press the Fan speed
button for 5 seconds. After this operation, the led of the fi lters indicator turns off and the setting of the 30 hours starts
again from the beginning.
After 120 hours the led will fl ash continuously. This means that the carbon fi lters have to be replaced (if present).
To reset the function (with hood off ) press the Fan speed button for 5 seconds. After this operation, the led of the
indicator turns off and the setting starts again from the beginning Clean air indicator (8).
With the hood off , press the Power button (1) for 5 seconds to activate the CLEAN AIR function. This will switch on the
motor at speed 1 for 10 minutes every hour. The light indicator will switch on without fl ashing and the led of the 1st
speed will switch on. In the remaining 50 minutes the light indicator will fl ash. The function can be deactivated by
pressing any button except for the lights one.
COMMANDS
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR EVENTUAL DAMAGES CAUSED BY BREACHING
THE ABOVE WARNINGS.