07
35
Before You Start
6
Replacing the Fuse
Make sure the amperage matches the
specified value when replacing the fu-
ses. If the fuse is blown, check the po-
wer connection and replace with a n-
ew one. If the same problem occurs,
it would be subjected to the malfun-
ction. In such cases, please consult
to the nearest service dealer.
When the range of the operation of the
card remote control becomes short or no
functions while operating. Replace the
lithium battery with a new button cell
(CR2025). Make sure the battery polarity
before replace.
Precautions on Using Lithium
Battery
Always keep the lithium battery beyond
children s reach. In case
swallowed, see a doctor immediately.
Cleaning the battery with a dry cloth,
to ensure its perfect connected.
Make sure the proper polarity when
loading with the battery.
To prevent short circuit, do not use
metal tweezer to clip the battery.
Gently pull out the Battery Holder while
pressing the Stopper.
Put the button-type battery with mark(+)
upward into the Battery Holder.
Replacing the Battery
Insert the Battery Holder into the Remote
Control.
!
Maintenance
Warning
Never use the fuse with the rated
amperage more than that supplied to
your unit, otherwise it will damage the
unit.
Warning!
Improper handle with the battery may
lead to explosion.
It cannot be charged , disassembled or
thrown into a fire.
!
Tuner
FM2
MW2
(AM2)
MW1
(AM1)
FM3
FM1
FM2
LW
MW
FM3
FM1
(For Two Bands)
During radio status, repeatedly press
BAND
button to select bands in
lowing order:
the
fol
Band Selector
Manual/Automatic Tuning
Manual Tuning: Briefly pressing
(
button on the remote control continuously to
select a
or
res-
pectively.
or )
station downward
upward
Automatic Tuning: ress and
button
seconds, the
radio a
station
or
respectively and plays
when it finds a station.
P
hold
(
or
)
for more than 3
automatically searches
down-
ward
upward
(For Three Bands)
It is set to LOC mode when
button
is first pressed.
LOC
pears on the
display and only local
tion is available.
LOC
ap
sta
It is switched to DX mode when
is pressed again. Both
and local
stations can be received.
LOC
distance
During radio status, you can press
ST
button on the remote control
Mono
mode or
Stereo
to select
mode.
DX/LOC Selector
During radio status, press
LOC
button on
the remote control to select
or weak
station reception.
strong
Notes:
MO/ST Selector
Stereo reception is charged when
ST
appears.
It is switched to
MONO
mode
disappears.
when
ST
3
5
6
Note:
Note:
Note:
20
1
1
2
2
* LOC mode is functional only in selecting
and memorizing stations.
* The initial mode is DX mode.
* Pressing BAND button on the head unit
performs the same function.
* Pressing button on the head unit performs
the same function.
12
Selecting the Stored Station
During radio mode, press to select the
upward stored station, press to select the
downward stored station.
Note:
27
* This function is only operated by using rem-
ote control.
* This function is only operated by using rem-
ote control.
20
5
5
On-screen display
Press
OSD
to display the current
information.
* This function is operated by using
remote
control.
the
Note:
8
* This function is only operated by using rem-
ote control.
