FreeWave Technologies
HT Ethernet Addendum
900MHz
V1.0h
Errata for Firmware Versions
The Following are known issues with Firmware version 2.54F:
•
Firmware version 2.54F is the first release of HT firmware that is field upgradeable. This
firmware also supports over the air firmware upgrades.
Point to Point Functionality
•
Wideband mode is not operational.
•
Slave/Repeater is not supported.
•
Frequency Zones are not supported.
•
Only 3 Frequency tables are available (0, 1 and 2).
•
Serial Slave UDP mode is not Supported
Point to Multipoint Functionality
•
Delay Option is not functional.
•
Data Rate of 2 should not be used.
•
Wideband mode is not operational.
•
Slave/Repeater is not supported.
•
Frequency Zones are not supported.
•
Only 3 Frequency tables are available (0, 1 and 2).
•
Serial Slave UDP mode is not Supported
The Following are known issues with Firmware version 2.55:
Overall (Point to Point and Point to Multipoint) Functionality
•
Wideband mode is not operational.
•
Slave/Repeater is not supported.
•
Frequency Zones are not supported.
•
Only 3 Frequency tables are available (0, 1 and 2). Note the full compliment of 7 (0-6) are
selectable however, the only 3 Frequency tables that are supported are Standard, Australian
and Standard 2.
•
Serial Slave UDP mode is not Supported
Point to Point Functionality
Improvements:
•
Bug fixed in Encryption. Encryption is Case Sensitive.
•
Delay Distance feature functions but does not support Repeaters.
Point to Multipoint Functionality
•
Delay Option is not functional.
•
Data Rate of 2 is not supported.
Improvements:
•
Bug fixed in Encryption. Encryption is Case Sensitive.
LAD0013AB Rev H
8 of 11
