FreeWave Technologies
HT Ethernet Addendum
900MHz
V1.0h
The following are known issues with Firmware version 2.58:
Overall (Point to Point and Point to Multipoint) Functionality
•
Wideband mode is not operational.
•
Slave/Repeater is not supported.
•
Frequency Zones are not supported.
•
Only 3 Frequency tables are available (0, 1 and 2). Note the full compliment of 7 (0-6) are
selectable however, the only 3 Frequency tables that are supported are Standard, Australian
and Standard 2.
•
Serial Slave UDP mode is not Supported
Point to Point Functionality:
•
Delay Distance feature functions, but does not support Repeaters.
Point to Multipoint Functionality
•
Delay Option is not functional.
•
Data Rate of 2 is not supported.
Improvements:
•
Radio lock-up issue in networks with repeaters was resolved.
The following are known issues with Firmware version 7.60:
Overall (Point to Point and Point to Multipoint) Functionality
•
Wideband mode is not supported
•
Slave/Repeater mode is not supported
Point to Point Functionality:
•
Delay Distance option does not support repeaters
Point to Multipoint Functionality:
•
Delay distance option is not supported
•
RF Data Rate of 2 is not supported
Improvements:
•
Firmware revision number has been changed to 7.xx, to differentiate HT firmware from FGR
firmware
•
Frequency zones are now supported
•
All hop table versions are now supported
•
CTS lock-up issue has been resolved
LAD0013AB Rev H
9 of 11
