41
If the auto-detected parameters displayed do not match the ones
that should be used for your hard drive, do not accept them. Press
the <N> key to reject the values and enter the correct ones manually
in the Standard CMOS Setup screen.
Note: If you are setting up a new hard disk drive that supports
LBA mode, more than one line will appear in the param
eter box. Choose the line that lists LBA for an LBA drive.
Do not choose “Large” or “Normal” if the hard disk drive is
already fully formatted when you installed it. Select the mode that
was used to format it.
K
Access Mode: This item defines some special ways that can be
used to access IDE hard disks such as LBA (Large Block
Addressing). Leave this value at “Auto” and the system will
automatically decide the fastest way to access the hard disk
drive.
Press <Esc> to close the IDE device sub-menu and return to the
Standard CMOS Features page.
Floppy Drive A and Floppy Drive B: Options for these fields are:
H
360K, 5.25 in.
H
1.2M, 5.25in.
H
720K, 3.5in.
H
1.44M, 3.5in. (Drive A default)
H
2.88M, 3.5in.
H
None (Not Installed) (Drive B default)
The “Not Installed” option could be used as an option for diskless
workstations.
Standard CMOS Setup
BIOS Configuration
Содержание P6F135
Страница 1: ...2 MOTHER BOARD USER S MANUAL ...
