Mainboard User’s Manual
38
This program should be executed under the following conditions:
K
When changing the system configuration
K
When a configuration error is detected by the system and you are
prompted to make changes to the Setup program
K
When resetting the system clock
K
When setting the CPU clock speed so that it automatically runs
either fast or slow
K
When redefining the communication ports to prevent any conflicts
K
When making changes to the Power Management configu-ration
K
When changing the password or making other changes to the
security setup
Normally, CMOS setup is needed when the system hardware is not
consistent with the information contained in the CMOS RAM, whenever
the CMOS RAM has lost power, or the system features need to be
changed.
4.1. Entering Setup
When the system is powered on, the BIOS will enter the Power-On Self Test
(POST) routines. These routines perform various diagnostic checks; if an
error is encountered, the error will be reported in one of two different ways:
1. If the error occurs before the display device is initialized, a series
of beeps will be transmitted.
2. If the error occurs after the display device is initialized, the screen
will display the error message.
After the POST routines are completed, the following message appears:
Entering Setup
Содержание P6F135
Страница 1: ...2 MOTHER BOARD USER S MANUAL ...
