manualshive.com logo in svg

Freetech P6F128, Руководство пользователя

Поделиться
Скачать
Freetech P6F128 Скачать руководство пользователя страница 51

45 

BIOS Configuration 

 

ACPI Function: 

When set to “Enabled,” turns on the ACPI Function.  

The default setting is “Disabled.” 

 

 

Note: ACPI (Advanced Configuration and Power Interface) is 

a   

 

power management specification that makes hardware   

 

status information available to the operating system.  ACPI   

 

enables a PC to turn its peripherals on and off for improved 

 

power management.  It also allows the PC to be turned on   

 

and off by external devices, so that mouse or keyboard   

 

activity wakes up 

the computer.

 

 
 
 

ACPI Suspend Type: 

Use this item to define how your system suspends.  

If set to S1(POS), the suspend mode is equivalent to a software power 
down. When set to the default setting, S3(STR), the suspend mode is a 
suspend to RAM – the system shuts down with the exception of a refresh 
current to the system memory. 

 

Power Management: 

This setting controls the System Doze Mode, 

Standby Mode, and Suspend Mode Timer features.  There are four 
options: 
 

—

 

User Define: allows you to customize all power saving timer   

 

features 

 

—

 

Max Saving: recommended setting for general use 

 

—

 

Min Saving: sets power saving at minimum values 

 

Video Off Method: 

This setting controls the video off method in power 

saving mode.  The default setting is “V/H SYNC+Blank” which disables 
V/H SYNC signals and blanks the screen.  Other options are “DPMS” 
and “Blank Screen”.  The “DPMS” option allows the BIOS to control the 
video card if it has the DPMS (Display Power Management System) 
feature.  The “Blank Screen” option is used when you do not have a 
“Green” monitor. 

 

Video Off In Suspend: 

Set this to “Yes” if you want the Video display to 

turn off during suspend mode. 

 

Suspend Type: 

Enables you to select the Suspend type.  Options are 

“Stop Grant” and “PwrOn Suspend.” 

 

Содержание P6F128

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды