manualshive.com logo in svg

Freetech P6F128, Руководство пользователя

Поделиться
Скачать
Freetech P6F128 Скачать руководство пользователя страница 39

33 

BIOS Configuration 

 

IDE Primary/Secondary Master/Slave: 

If you leave this item at “Auto”, 

the system will automatically detect and configure any IDE devices it 
finds.  If it fails to find a hard disk, change the value to “Manual” and 
then manually configure the drive by entering the characteristics of the 
drive in the items below (Capacity, Cylinder, Head, Precomp, etc.).  
Refer to your drive’s documentation or look on the drive if you need to 
obtain this information.  If no device is in-stalled, change the value to 
“None.” 

 

Access Mode: 

This item defines some special ways that can be used 

to access IDE hard disks such as LBA (Large Block Addressing).  
Leave this value at “Auto” and the system will automatically decide the 
fastest way to access the hard disk drive. 

 

Press <Esc> to close the IDE device sub-menu and return to the 
Standard CMOS Features page. 

 

Floppy Drive A and Floppy Drive B: 

Options for these fields are: 

 

—

 

360K, 5.25 in. 

—

 

1.2M, 5.25in. 

—

 720K, 3.5in. 

—

 1.44M, 3.5in. 

—

 2.88M, 3.5in. 

—

 None (Not Installed) 

The “Not Installed” option could be used as an option for diskless 
workstations. 

 

Video: 

Set this field to the type of graphics card installed in your system. 

If you are using a VGA or higher resolution card, choose the “EGA/VGA” 
option.  The options are: 

—

 EGA/VGA (default) 

—

 MONO 

—

 CGA 40 

—

 CGA 80 

 

Halt On: 

This setting determines which type of errors will cause the 

system to halt during bootup.  The options are: 

 

—

 

All Errors 

 

—

 No Errors 

 
 

Содержание P6F128

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды