Freetech P6F128, Руководство пользователя

Страница: 41 / 64

35
BIOS Configuration
Anti-Virus Protection: When enabled, any attempt to write to the boot
sector or partition table will halt the system and cause a warning
message to appear. If this happens, you can use an anti-virus utility on a
virus free, bootable floppy diskette to reboot and clean your sys-tem.
The default setting is “Disabled.”
CPU Internal Cache: This Setting enables the CPU internal cache.
The default setting is “Enabled.”
External Cache: This setting enables the Level 2 cache. The default
setting is “Enabled.”
CPU L2 Cache ECC Checking: This item enables or disables ECC
(Error Correction Code) error checking on the CPU cache memory. The
default setting is “Disabled.”
Quick Power On Self Test: This will skip some diagnostic checks during
the Power On Self Test (POST) to speed up the booting process. The
default setting is “Enabled.”
1
st
/2
nd
/3
rd
/4
th
Boot Device: Use these three items to select the priority
and order of the devices that your system searches for an operating
system at start-up time. The default settings are “Floppy,” “HDD-0,”
“LS120” and “Disable” respectively.
Swap Floppy Drive: If you have two floppy diskette drives in your
system, this item allows you to swap the assigned drive letters so that
drive A becomes drive B, and drive B becomes drive A. The default
setting is “Disabled.”
Boot Up Floppy Seek: If this item is enabled, it checks the geometry of
the floppy disk drives at start-up time. You don’t need to enable this
item unless you have an old diskette drive with 360K capacity. The
default setting is “Enabled.”
Boot Up Numlock Status: If set to “Off,” the cursor controls will function
on the numeric keypad. The default setting is “On.”
Gate A20 Option: This option accesses memory above 1 MB using the
fast gate A20 line when set to “Fast” (default). The other option is
“Normal.”